The General Setup Button - SAES NEG POWER User Manual

4.3.

The General Setup button

A Setup button is present in the General menu. It allows to access menus of instrument settings:
Date and time settings, Network settings, Modbus Server Settings, Output Channel Settings,
Brightness and Standby time.
SAVE button saves the changes. BACK button leaves the menu.
REBOOT button restarts the firmware.
Five different pages are shown by pressing the arrow navigation keys:
Date and Time Settings: set current date and time
Network Settings: if your network is equipped with DHCP server, you can use DHCP for
automatic IP address assignment, otherwise select Static and press edit to change IP Address and
network mask, Default Gateway and DNS.
The default setting is static IP address 192.168.1.10 / 24. "/24" is the same as network mask equal
to 255.255.255.0.
th
M.HIST.0101.23 R2 Page 12 of 36 January, 26 2021