The Setup Menu - SAES NEG POWER User Manual

4.4.

The Setup Menu

A setup page is present for each output (1...4).
2
3
1
Touch the output to be set.
Status indicates the status of the output. It can assume 5 different values:
IDLE: the power supply is ready to give power to this output.
CHECK OPEN: first check made before starting the power supply in order to ensure that the pump
is connected.
RAMP: output is powered and the power is rising (t_rise time).
HOLD: ramp is finished and the power is maintained.
ALARM: there is some problem with the settings or with the output.
Touch the pump name to select the pump model to be controlled. A new window appears
2
on the screen: touch the pump model to be selected (for example CapaciTorr D1000 in the
example below).
The system shows automatically the list of SAES pumps that can be controlled with that
output. In the left example picture below a list of pumps for standard 700 W module is
shown, whereas the right picture shows the list that will appear when the low power module
(150 W module) is installed.
M.HIST.0101.23 R2
1
4
4b
Page 15 of 36
5
th
January, 26 2021