Advertisement
•
Halogen lighting:
Halogen connections are located above
the halogen support. To access, remove the 2
mounting screws linking it to the beam.
•
Electric cabling:
Electric cabling is fixed behind the built-in control panel. To access this, remove the 4 screws
holding the panel.
The installer should check electric connections when commissioning the unit then once a year.
Any maintenance operation should be done by an electrician.
Vauconsant SA, all rights reserved A625xx -rev0-ENG, 14/10/2010
Beam
Halogen support
USER MANUAL
Reflector
- 9 -
Advertisement
