Dexter Laundry 800AG2-125.5AB1 Instruction Manual page 35

Please use grinding protective cover for grinding operation.
Grinding and Surface Processing
In order to grind surface, you should use a coarse abrasive disk with a sunken
centre.
You can use the abrasive disks with diameter of 125mm. The maximum thickness
of disks is 6mm.
Mounting the Wheels /Disks
Allow the angle grinder to run in idle at least 1 minute with the grinding or
cutting disc correctly assembled, a vibration disc should be immediately replaced.
B
(Thick)
A
C
35
A
B C
(Thin)
BR
EN