Dexter Laundry 800AG2-125.5AB1 Instruction Manual page 26

BR
c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
EN
accessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed.
those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
Safety Warnings Common for Grinding Operations:
a) This power tool is intended to function as a grinder or cut-off tool.
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool.
Failure to follow all instructions listed
b) Operations such as sanding, wire brushing, polishing are not
recommended to be performed with this power tool.
Operations for
which the power tool was not designed may create a hazard and cause
personal injury.
c) Do not use accessories which are not specifically designed and
recommended by the tool manufacturer.
Just because the accessory can
be attached to your power tool, it does not assure safe operation.
26