Intend Use - Dexter Laundry 800AG2-125.5AB1 Instruction Manual

- Do not use separate reducing bushings or adapters to adapt large hole abrasive
wheels;
in the wheel is long enough to accept the spindle length;
- Check that the work piece is properly supported;
- Ensure that sparks resulting from use do not create a hazard e.g. do not hit
- Ensure that ventilation openings are kept clear when working in dusty
from the mains supply (use non metallic objects) and avoid damaging internal
parts;
- Always use eye and ear protection. Other personal protective equipment such as
dust mask, gloves, helmet and apron should be worn;
on the tool so that the closed side of the guard always points toward the
operator.

4. INTEND USE

WARNING! Always wear protective goggles.
discs from grease or impact!
Never use parting grinder discs for roughing work! Do not apply pressure to the
side of parting grinder discs.
If accessories with threaded inserts are used, the end of the spindle may not
touch the base of the hole on the sanding tool. Make sure that the thread in the
accessory is long enough to accommodate the full length of the spindle. The
thread in the accessory must match the thread on the spindle.
When working in dusty conditions, ensure that ventilation openings are not
damaging internal components.
Damaged, eccentric or vibrating tools must not be used.
Avoid damage to gas or water pipes, electrical cables and load-bearing walls
31
BR
EN