Table of Contents
Advertisement
1. Introduction
The model S-12S Shark Universal Overhead Guard attachment is used for the safety
protection and dust collection while operating the table saw. The diameter of the dust port is
4"(100mm). This attachment is suitable for the saw with maximum diameter of 12"(305mm).
Its cutting capacity is up to 52"(1320mm). This attachment can be installed on the rear rail
of your table saw easily with convenient operation and maintenance. It is fit for the most of
the mainstream products in the market.
Main Fit Model:
------110LG (C300), 110S, 110LC-36
------ G0690, G0691
------ W1819, W1820
2. Unpacking
S-12S is packaged by a high strength corrugated box, refer to below table for detailed
package information. Please check the contents of the shipping box by the inventory list
and Fig.1.
NOTE: If you can't find an item on this list, check the mounting locations or examine
the packaging materials carefully. Occasionally we pre-install certain components
for shipping purposes.
Type
Box
Inventory
A. Dust port(100mm)
B. Stand pole unit
C. Arm unit
(contains 1 dust port and 2 M5x12 pan head screws)
D. Guard unit
(contains 2 flat transparent shields and 1 spherical
transparent shield)
E. Support arm
(contains 4 sets of M10x40 hex screws for mounting
stand pole; 3 sets of M12x110 screws for mounting
support arm and 2 sets of M8x20 cap screws for
mounting support leg)
F. Support leg unit
(contains 2 sets of M12x110 screws for mounting
support plate
Net/Gross weight (Kg)
46/54
Dimensions of Box(mm)
1732X542X282(H)
Fig. 1
3
Advertisement
Table of Contents
