HANDY EXTRAS Allen key Wrench Ratchet with Sockets Rubber mallet *IMPORT ANT Read through the instruction thoroughly before Never climb or swing on the product. assembling. Use extreme caution when moving or raising the product. Check parts for any defects prior to the assembly. Beware of over head power lines when installing the product.
Page 4
SOCKET INSTALLATION GUIDE STEP 1 Establish the position of each ground socket. We recommend using a measuring tape and spray paint to do this. We also recommend socket centres of 5m (16ft 5”) for our aluminium posts although this may vary depending on what setup you have ordered (for clarification please contact us).
Page 5
POST ASSEMBLY GUIDE. FIG.1 39170 STEP 1 - assemble posts 39172 Lay out rail sections (39170), rail middle section (39171) 39171 and rail connectors (39172) Slide 1 connector into each end of middle rail section aligning pre-drilled holes over each other. Slide one end of rail section (39170) onto connectors ensuring holes align.
Page 6
FIG 3.b Locate rubber cap (39177) on to the post See FIG 3.b STEP 6 - Fix cleat and net hook Slide 2x M10x20 bolts (38049) into the other end of the assembled post Locate 1 bolt approximately 1.25m from the bottom and locate the cleat (39174) over it Secure with M10 washer and Lock nut Locate the other bolt high enough up the post to allow it to be located properly into socket (approx 0.9m) secure with M10 washer and lock nut...
Page 7
STEP 7 Attach hauling rope thread hauling rope through pulley and tie to cleat. STEP 8 Install posts and net. install posts into pre installed sockets. Lay out net and tie one end of hauling rope to the net haul the rope to the top and hook net over net hook.