flowair T-box User Manual page 60

Capacity setting
Cube
capacity
active operating mode
airflow setting
The icon informs that the parameter has
been defined in the calendar. It is possible
to change the parameter temporarily.
The change will only be active in a given
calendar zone
Thermostatic mode - Fans turn OFF after
Therm
reaching the set temperature. The option is
not available when the device is operating
in according to the supply air temperature
sensor as a leading sensor.
The selection of the leading/master sensor
from: supply air, exhaust air and wall
temperature sensors is made during first
startup. It is also possible to define built in
sensor in T-box sensor he leading sensor
124
Capacity setting - gas detector
Cube
capacity
active operating mode
Activate the functions of working with a gas detector -
see section „External gas detector" on page 14.
You need to define 3 parameter values:
- normal working condition
- 1 - first level of alarm from gas detector
- 2 - second level of alarm from gas detector
www.flowair.com