Leo D Destratificators - flowair T-box User Manual

short

LEO D destratificators

press
Settings
air flow setting – 3-steps
2
selection of operating mode
readings
settings of manual operating mode
settings of auto operating mode
98
Operating modes
Operating mode
active operating mode
Auto – integration of operation of destratificators
with LEO heaters and effective use of heat
from upper zones of the room. Destratificators
are turned on automatically, when there is
suitable amount of heat accumulated in the
upper zones of the room. Units press of warm
air down to occupied zone. When amount of
heat is insufficient, LEO heaters are turned on
automatically.
Manual – destratificator operates in ON/OFF
mode. It is turned on when temperature under
the ceiling is higher than set temperature.
www.flowair.com