inelo TachoReader Combo Plus Tutorial page 18

Download from driver card inserted in the tachograph
1. For any selected configuration of
activities to be downloaded from the tachograph (see:
If you are not sure what to choose, click on the button:
2. Additionally, check the:
Option III - Configuration on the device - Downloading data from driver card only
1. Regardless of the chosen button configuration, check
.
2. Other options do not affect the data download in this option.
Operations on the vehicle:
We recommend that you read the operating instructions of the tachograph.
1. Turn the ignition switch to position II (ignition) - until the lights on the dashboard switch on
(switching on the tachograph).
We recommend to carry out the above step accompanied by the driver of the vehicle.
2. Depending on the selected option:
Option I - insert the driver card into any slot of the tachograph;
·
17
Option II - - insert a company card and the driver card to any tachograph slots;
·
17
After reading the company card, some tachographs may request confirmation of "unlocking".
In this case, "unlock" the tachograph, or "Technical data" and "Activities" will not be downloaded.
Option III - insert the driver card into any slot of the tachograph;
·
18
Old types of tachographs:
For and
17
Option I Option III
3. Connect TachoReader Combo Plus device to the tachograph using a Tacho RC cable .
4. Depending on the selected option:
Option I - press the button you configured (
·
17
Option II - press the button you configured (
·
17
, or
Driver card download via tachograph option.
it may also be required to insert the company card.
18
button, choose the type and scope of
"Configuration " topic for more).
8
.
Select day range using this button
, or )
, or )
18