Download From Driver Card Inserted In The Tachograph - inelo TachoReader Combo Plus Tutorial

Download from driver card/workshop card
If during data retrieval red LED located in the center of the label lights up for about 4 seconds, and in this
time the device sounds three short beeps, then it goes off for about 2 seconds (repeatedly), this means an
error occurred - refer to the
3. End of data download will be signaled by the device by repeated beeps and flashing
the progress bar.
4. Remove the card from the device slot.
5. The data is saved to a file (Surname
download.DDD) placed in the CARD directory in the device memory.

9. Download from driver card inserted in the tachograph

TR Combo Plus can download simultaneously or individually the data from a driver card inserted
in the tachograph and the tachograph data. This depends on the settings described below.
Operations after connecting to a computer:
Open the device configuration window (see:
Option I - Downloading data from driver card only
1. For any selected configuration of
2. Check one option only:
Option II - Simultaneous downloading data from driver card and the tachograph
Fig. TachoReader Combo Plus - inserting a driver card.
"Error codes " topic.
20
First name
_
"Configuration
, or
Driver card download via tachograph .
Middle name Date and time of data
_ _
" topic for more), and then:
8
button uncheck all the options.
EDs on
L
17