Advertisement
ASSEMBLY
Step 1:
Remove the main frame (1) from the package and unfold it in the direction indicated by the
arrow above. Place the frame on the ground in the direction of the above figure and align
the pinholes as shown. Insert the three pins d10x60 (4) into the pin holes respectively.
Step 2:
Assemble the front foot tube set (2) on the main frame (1), using the carriage screws (3.1),
curved washers (3.2) and locknuts (3.3). Use the open-end wrench (6) to tighten the nuts
clockwise.
Advertisement
