Specifications - Sony DVP-F21 Operating Instructions Manual

Specifications

System
Laser
Signal format system
Audio characteristics
Frequency response
Signal-to-noise ratio (S/N ratio)
Harmonic distortion
Dynamic range
Wow and flutter
The signals from AUDIO OUT L/R jacks are measured. When you play PCM sound tracks with a 96 kHz sampling
frequency, the output signal from the DIGITAL OUT (OPTICAL) jack is converted to 48 kHz sampling frequency.
Outputs
Jack name
DIGITAL OUT
(OPTICAL)
AUDIO OUT L/R
VIDEO OUT
S-VIDEO OUT
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Semiconductor laser
NTSC
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
115 dB (AUDIO OUT L/R jacks only)
0.003%
DVD: 103 dB
CD: 99 dB
Less than detected value (±0.001% W PEAK)
Jack type
Optical output jack
Phono jack
Phono jack
4-pin mini DIN
DC 10.5 V
See page 3 for further information.
12 W
252 60
including projecting parts
1.5 kg (3 lb 5 oz)
5°C to 35°C (41°F to 95°F)
25% to 80%
Maximum output
level
-18 dBm
2 Vrms (50 kilohms)
1.0 Vp-p
Luminance signal:
1.0 Vp-p
Color signal:
0.286 Vp-p
183 mm (10 2 3/8 7 1/4 in.) (width/height/depth)
Load impedance
Wave length 660 nm
Over 10 kilohms
75 ohms, sync negative
75 ohms, sync negative
75 ohms terminated
continued


79