Sony DVP-CX860 Operating Instructions Manual page 75

To Operation
Select a disc during Press the number button on the
playback remote and ENTER, or M/m and
ENTER, or turn the click shuttle
slowly and press ENTER.
Or, press DISC CHANGE to turn
the indicator on followed by
turning the .–/>+ dial and
then pressing it.
Skip by 10 discs in Press </, and then press
continuous play ENTER.
mode
Stop Press x.
Pause Press X.
Resume play after pause Press X or H.
Go to the next track On the player:
during playback Press DIRECT SEARCH to turn it
on and turn the .–/>+ dial
clockwise.
On the remote:
Press >.
Go back to the preceding On the player:
track during playback Press DIRECT SEARCH to turn it
on and turn the .–/>+ dial.
counterclockwise
On the remote:
Press ..
To control the player again
Press MEGA CONTROL on the player or MEGA on the
remote.
The MEGA CONTROL button on the player turns off and
you can control the player.
Notes
• Connect only a Sony 5/50/200/300 CD changer to the MEGA
CONTROL jack.
• You cannot locate a particular point on a CD's track using the
controls on the player.
• Depending on the CD changer, some controls on the player
may not operate the CD changer as they do the player.
• You cannot control the player when the MEGA CONTROL
button on the front panel is lit.
• The player will not enter Resume Play after the MEGA
CONTROL button on the front panel has been turned on and
off.
• You cannot control the CD changer right after turning on the
player or connecting the CD changer. Wait a few seconds until
the player recognizes the CDs.
• When the MEGA CONTROL button is lit, you cannot use the
Control Menu and Disc Explorer.
75