Sony DVP-CX860 Operating Instructions Manual page 73

Controlling the TV
When you set the TV/DISC EXPLORER/DVD switch to
TV, you can control your TV using the buttons below.
Set the TV/DISC
EXPLORER/DVD
switch to TV.
1 2 3
Number
4 5 6
buttons
7 8 9
0
A B C
ENTER
FILE SORT EDIT
By pressing
You can
?/1 Turn the TV on or off
TV/VIDEO
Switch the TV's input source between
the TV and other input sources
VOL
Adjust the volume of the TV
CH Select the channel of the TV
WIDE MODE
Switch the wide picture on or off
Number buttons
Select the channel of the TV
and ENTER
Note
Depending on the TV, you may not be able to control your TV or
to use some of the buttons above.
Controlling AV receivers (amplifiers) with
the remote
Set the TV/DISC
EXPLORER/DVD
switch to DVD.
1 2 3
Number
4 5 6
buttons
7 8 9
0
A B C
FILE SORT EDIT
1
Slide the TV/DISC EXPLORER/DVD switch to DVD.
2
Hold down ?/1, and enter your AV receiver's
manufacturer's code (see the table) using the
number buttons.
?/1
VOL
CH
MEGA
TV/VIDEO
D ALL
WIDE MODE
DVD CD
LOAD
ENTER
?/1
MEGA
D ALL
DVD CD
LOAD
3
Release ?/1.
Code numbers of controllable AV receivers
(amplifier)
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
AV receiver (amplifier).
Manufacturer Code number
Sony 91 (default), 89
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
Controlling the AV receiver (amplifier)
When you set the TV/DISC EXPLORER/DVD switch to
DVD, you can change the volume of the AV receiver
(amplifier) using VOL.
Set the TV/DISC
EXPLORER/DVD
switch to DVD.
1 2 3
4 5 6
7 8 9
0
A B C
FILE SORT EDIT
Note
Depending on the AV receiver (amplifier), you may not be able to
control your AV receiver (amplifier).
VOL
MEGA
D ALL
DVD CD
LOAD
73