Additional Operations - Sony DVP-CX860 Operating Instructions Manual

Dvd players & recorders: cd/dvd player

Hide thumbs Also See for DVP-CX860:

Operating instructions manual (96 pages)

Dimensions (1 page)

Service manual (142 pages)

Table Of Contents

Table of Contents

Playing Discs

After following Step 4

xWhen playing a DVD

A DVD menu or title menu may appear on the TV

screen (see page 24).

xWhen playing a VIDEO CD

Depending on the VIDEO CD, a menu may appear on

the TV screen. You can play the disc interactively by

following the instructions on the menu. (PBC Playback,

see page 25.)

To turn on the player

Press ! on the player. The player enters standby mode

and the power indicator lights up in red.

Then press @/1 on the remote. The player turns on and

the power indicator lights up in green. In standby mode,

the player also turns on by pressing H.

To turn off the player

Press @/1 on the remote. The player enters standby mode

and the power indicator lights up in red.

To disconnect the power of the player, press ! on the

player.

Notes on playing DTS sound tracks on a CD

• Do not play DTS sound tracks without first connecting the

player to an audio component having a built-in DTS decoder.

The player outputs the DTS signal via the DIGITAL OUT

OPTICAL and COAXIAL connectors even if "DTS" in "AUDIO

SETUP" is set to "OFF" in the setup display, and may affect

your ears or cause your speakers to be damaged.

• Set the sound to "STEREO" when you play DTS sound tracks

on a CD. (See "Changing the Sound" on page 43.) If you set

the sound to "1/L" or "2/R," no sound will come from the

DIGITAL OUT OPTICAL and COAXIAL connectors.

• If you play a CD with a DTS sound track, a loud noise may

come out from the AUDIO OUT connectors, affecting your ears

or causing the speakers to be damaged.

Notes on playing DTS sound tracks on a DVD

• The signals of the DTS sound tracks are output from the

DIGITAL OUT OPTICAL and COAXIAL connectors only. No

sound will be output from the AUDIO OUT connectors.

• If the player is connected to an audio component lacking a

built-in DTS decoder, do not set "DTS" in "DIGITAL OUT" to

"ON" in the setup display. Otherwise, when you play the DTS

sound track, a loud noise will come out from the speakers,

affecting your ears or causing the speakers to be damaged.

• When you set "DTS" in "AUDIO SETUP" to "OFF," no sound

will come out from the DIGITAL OUT OPTICAL and

COAXIAL connectors even if you play DTS sound tracks on

DVDs.

Notes

• If you leave the player or the remote in pause or stop mode for

15 minutes, the screen saver image appears automatically. It

will also appear if you play back a CD for more than 15

minutes. To make the screen saver image go away, press H.

(If you want to set the screen saver function to off, see page 64.)

• While playing a disc, do not turn off the player by pressing !.

Doing so may cancel the settings of the menu. When you turn

off the player, press x first to stop playback and then press @/1

on the remote. After the power indicator lights up in red and

the player enters standby mode, press ! on the player.