x PLAYBACK MEMORY (DVD only)
The player can store the AUDIO, SUBTITLE and other
settings of each disc for up to 301 slots (Playback
Set the Playback Memory function on or off.
• ON : stores the settings in memory when you eject the
• OFF : does not store the settings in memory.
The following settings are stored in memory by the
Playback Memory function.
– AUDIO (page 43)
– SUBTITLE (page 45)
– ANGLE (page 46)
– VES (page 47)
• The player can store the settings of up to 301 slots. When you
have the player store a new disc in memory, the data for the old
disc is erased.
• The Playback Memory settings are not effective for side B.
• Depending on the DVD, the information stored in the disc
takes priority over the Playback Memory settings and the
function does not work.
• Do not turn off the player by pressing !. Doing so may cancel
the settings. When you turn off the player, press x first to stop
playback and then press ?/1 on the remote. After the power
indicator lights up in red and the player enters standby mode,
press ! on the player.
x TRACK SELECTION
Gives the sound track which contains the highest number
of channels priority when you play a DVD on which
multiple audio formats (PCM, DTS or Dolby Digital
format) are recorded.
• OFF : No priority given.
• AUTO : Priority given.
• When you set this item to "AUTO," the language may change
depending on the "AUDIO" settings in "LANGUAGE SETUP."
The "TRACK SELECTION" setting has higher priority than the
"AUDIO" settings in "LANGUAGE SETUP" (page 63).
• If you set "DTS" in "AUDIO SETUP" to "OFF", the DTS sound
track is not played even if you set this item to "AUTO" and the
highest-numbered audio channel is recorded in DTS format.
• If PCM, DTS and Dolby Digital sound tracks have the same
number of channels, the player selects PCM, DTS and Dolby
Digital sound tracks in this order.
• Depending on the DVD, the audio channel with priority may
be predetermined. In this case, you cannot give priority to the
DTS or Dolby Digital format by selecting "AUTO."