Table of Contents
Advertisement
Before using for the first time
Remove all packaging material and
protective film.
Clean the inside of the appliance and
the accessories (see "Cleaning and
care").
Connecting the refrigeration appli-
ance
Connect the refrigeration appliance to
the electricity supply as described in
"Electrical connection".
Miele
will then appear on the appliance
display, followed by .
Filling and inserting the water con-
tainer for the humidifier
Fill the water container for the humid-
ifier with fresh drinking water (see
"Storing food in the PerfectFresh Act-
ive zone – Humidity-controlled com-
partment").
Place the water container in the divid-
ing plate between the refrigerator
section and PerfectFresh Active zone
(see "Storing food in the PerfectFresh
Active zone – Humidity-controlled
compartment").
Switching on and off
Switching the refrigeration ap-
pliance on
Open the appliance door.
Tap on the display.
The refrigeration appliance will start to
cool and the interior lighting will come
on when the appliance door is opened.
When the set freezer temperature is
reached, the
symbol disappears,
the temperature display of the freezer
section lights up constantly and the
alarm stops.
If the alarm annoys you, tap
The alarm will stop.
The appliance will gradually reach the
pre-set temperatures.
To enable the temperature to get suf-
ficiently cold inside the refrigeration
appliance, allow the appliance to run
for a few hours before placing food
in it. Do not place food in the refri-
geration appliance until it has
reached the preset temperature.
Do not place food in the freezer zone
until it has reached the preset tem-
perature (min. -18 °C).
.
41
Advertisement
Table of Contents
