Table of Contents
Advertisement
Problem solving guide
Message
lights up red in
the display and a
fault code F with
numbers may ap-
pear. An alarm
will also sound.
lights up red in
the display and
an alarm also
sounds.
94
Cause and remedy
There is a fault.
Tap on the display to switch the alarm off.
Call the Miele Customer Service Department.
To report the fault, you need the fault code and also
the model number and serial number of your refriger-
ation appliance. You can access this information on
the display.
To do this, touch on the display.
The appliance data required will be shown on the
display.
Confirm with OK to exit the information display and
the fault code will be shown again on the display.
The refrigeration appliance can be switched off dir-
ectly from the fault message display.
There is an appliance fault: this display always has
priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
There is a fault with the ice cube maker.
Tap
on the display to switch the alarm off.
Call the Miele Customer Service Department.
The ice cube maker can also be switched off in Set-
tings mode .
Advertisement
Table of Contents
