Cannon HENLEY 10582G Use And Installation Instructions page 26

INSTALLATION INSTRUCTIONS
SPACE FOR FIXING
The cooker can be close fitted below hotplate level. This requires a
minimum distance of 600mm between cupboard units of hotplate height.
When installing next to a tall cupboard, partition or wall, for a minimum
distance of 400mm above hotplate level, allow a side clearance of at least
65mm.
The diagram below illustrates the minimum clearance between the cooker
and adjacent walls, cupboards etc.
The wall behind the cooker between the hotplate and 450mm above, and
the width of the cooker, must be a non-combustible material such as
ceramic wall tiles.
COOKER HOODS
If a cooker hood is to be installed, refer to the cooker hood manufacturers'
instructions regarding fixing height.
UNPACKING THE COOKER
Unpack the components from inside the grill and oven: Check that the
following parts are present:
Grill pan and grid
Pan supports (4)
Enamelled burner caps (4)
Aluminium burner bodies (4)
26
600 mm Min
Meat pan
Main oven shelves (2)
Literature
Anti Splash tray
If the cooker is to be fitted
close to a corner base unit
on the left hand side, ensure
that there is a clearance of
65 mm Min
at least 50mm to allow the
oven door to open fully for
when removing oven
shelves.