Page 1
If you have ordered several items, keep it simple: only unpack one item at a time • Use the the Parts Diagram sheet to identify and distinguish between parts Any questions: call us on 01227 833333, or email sales@jali.co.uk • YOU WILL NEED EXTRA •...
Page 2
SEE HOW IT COMES TOGETHER This unit contains two or more sections, or ‘boxes’. The boxes can be built up independently and connected together, before the Top, Uprights and Skirting are attached. Each Box Top, Box Base, Box Back and Sides are engraved with the relevant box number. Your design may be different to this example, but don’t worry;...
Page 3
PLACE FIXINGS 1. Identify the two Box Sides that will be at each end of the finished unit. Note these parts have blind tenon recesses and a rebate along the rear edge. For each, place the Nickel Cams in all the available holes, facing outwards. Using a screwdriver, or power tool on a low setting, screw the Cam Bolts into the available 5mm holes.
Page 4
HOW DO CAM & BOLTS WORK? 1. Screw in the Cam Bolt, up to 3. Push the two parts together, the shoulder, into the 5mm hole so that the Cam Bolts disappear in one part. into the middle of the Cams. 2.
Page 5
5. For all the Uprights, fit Cam Bolts to all 5mm holes. There is also a 6mm hole - leave this for now. Mid Upright/s RH Upright LH Upright 6. Place White Cams in the Box Base, Box Top and Valance cam holes. Depending on your design, the Valance strip could be taller than this example.
BOX ASSEMBLY 7. Align the Valance White Cams with the Box Box Base Base Cam Bolts, then lock each cam securely in place. See Page 4 for help with cams. 8. The following instructions will cover the assembly process for a single box. Simply repeat this process for each box in your design, referring to the engraved box numbers on each of the Box Sides, Box Top, Box Base Valance...
Page 7
9. Once the Shelves and the Box Base assembly are placed in the RH Side, the LH Side can be located. Ensure that the Shelves with cams align with the Cam Bolts in the LH Side, and lock these into place. Lock the cams in the Box Top and Box Base. Fit 45mm CSK Screws through the 4mm holes (in the RH Side) into the Box Top, Box Base and Shelves with cams...
Page 8
NOW ASSEMBLE ALL THE OTHER BOXES Fix with 11. Carefully stand the boxes up and Connecting Screws position them adjacent to each other in the correct order. If they are too large to do safely, you’ll need to enlist some help. Ensure that they will not fall.
Page 9
13. Fit Dowels into the Front Skirt holes, and push home the Front Skirt into the holes on the Uprights and Valances. This can be glued into place, or left as is. Depending on your design, you may have LH and/or RH Skirts.
Page 10
For 30mm Tops, use 45mm CSK Screws. For 18mm Tops, use 30mm CSK Screws. For exceptionally wide units, the Top and Skirting may be supplied in several lengths. RH Skirting Front Skirting LH Skirting AND YOU’RE DONE! #jali #bookcase #makeityours Assembly Instructions: Multi Section Bookcase Page 10 of 10...