Operation - Kogan VULTUREX User Manual

OPERATION

Note:
For modes 2, 3 and 4, the remote must be aligned with the tail of the quadcopter.
1. 3D flip function
The quadcopter must fly to a height of at least 3m (10ft) to operate this function.
• To activate: Press the 3D flip button.
•
Push the right joystick to perform 360 degrees flip in a corresponding direction.
2. Headless mode
•
To activate: Press the headless mode button, wait for two tones to sound and the
LED to flash twice (use the joystick to determine the direction).
•
To exit: Press the headless mode button again.
3. One Key Return
•
To activate: Press the return key and hold for 2-3 seconds (the quadcopter will
return close to its starting point).
•
To exit: Press any key.
4. Trajectory Flight
•
To activate, press the trajectory flight button (use the altitude hold function for a
steady flight).
•
To create a flight track, draw on the control panel. Tap a blank area to cancel the
track.
•
To prolong the flight, adjust the scale on the bottom left of the display.
•
To exit trajectory flight, press the trajectory flight button again.