Table of Contents
Advertisement
Note:
•
To open the battery cover, push the camera towards the tail of the
quadcopter as the arrow directs.
•
Push towards the head of the quadcopter to close the battery cover.
•
Place a thumb on the edge of the lid covering the quadcopter battery and
slide to open (apply force carefully to avoid pulling off the camera).
Installing the landing skids and frames
1.
Install the landing skids to the bottom of the quadcopter with the screws and
screwdriver provided.
2.
Snap the connectors into the shackles.
Install the memory card into the camera
The camera supports micro SD card up to 64G. The memory card slot is on the dock of the
camera.
Paring the remote with the quadcopter
1.
Power on the quadcopter and the remote.
2.
Place the quadcopter on a level surface with the head at the front and the tail
facing the operator's direction (LED indicators on the quadcopter will flash rapidly
at first and then flash slowly).
3.
Push the left joystick forward then backward as far as possible until the flashing
LED indicators on the quadcopter stay still indicating a successful pairing. A tone
will sound after each stage.
Advertisement
Table of Contents
