Table of Contents
Advertisement
INSTRUCTION
Preparing for flight
Push the left and right joysticks to the left and right respectively to turn the blades. Gently
push the accelerator to launch the quadcopter.
Level calibration
This function is used when the quadcopter indicators flash rapidly after a sudden impact.
Place the aircraft on a level surface, push both the left and right joysticks to the lower right
corners or lower left corners and hold for 2-3 seconds. The rapid flashing indicators will turn
to a steady status indicating successful calibration. Turn off the devices and pair again if
level calibration fails.
Installing the remote batteries
1.
Press the "button" at the back of the remote control with a paperclip or the
screwdriver provided and then push the cover downward to open the battery cover.
2.
Place 3x AAA batteries in the battery box in strict adherence to the polarity
instructions. No battery should be installed with the opposite polarity.
Advertisement
Table of Contents
