Operation; Gear Selection - Polaris 2882798 Manual

OPERATION

IMPORTANT
The winch should always be transported in the
w
carrier to avoid damage to the vehicle and/or
winch assembly. ALWAYS secure it in place with the
s
provided hitch pin making sure the R-Pin
hitch pin assembly is fully seated and securely
holding the pin in place before transporting the
S
winch.
Instr 9927951
To use the integrated winch
carrier and place it into the receiver hitch
rear of the vehicle. ALWAYS secure it in place with the
provided hitch pin
hitch pin assembly is fully seated and securely holding
the pin in place before using the winch.
of the

GEAR SELECTION

Attempting to shift the winch while the rope is under
tension is dangerous and can result in injuries or
death. Make sure the winch rope is not in tension
before shifting the winch between gears.
Your winch is equipped with two different gear
settings. It will either be in the "LOCK" position or the
"FREE" position.
The free position is designed to allow you to "free-
spool" the winch when you want to pull the rope or
cable out faster than what it would allow while in the
lock position.
To shift between the free position and the lock position
simply turn the shifting knob located on the side of the
winch either clockwise or counter-clockwise
depending on the desired mode.
Rev 02 2017-11 Page 8 of 12
s
, remove it from the
s
making sure the R-Pin
WARNING
e
on the
S
of the