Speakman S-3471 Instructions

INSTRUCTIONS FOR MODELS

S-3471
For additional assistance or service please contact:
SPEAKMAN
®
800-537-2107
customerservice@speakman.com
www.speakman.com
92-S-3471-01

TOOLS AND SUPPLIES

Adjustable Pipe
Wrench Wrench
Slip Joint Plumber's
Wrench Putty

IMPORTANT

• Do not over-tighten any connections or damage
may occur.
• Be sure to read instructions thoroughly before
beginning installation.

SAFETY TIPS

Cover your drain to prevent loss of parts. Be sure to
wear eye protection while cutting pipe.

MAINTENANCE

Your new Speakman Product is designed for years
of trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. The use of
harsh chemicals and abrasives on any of the
Speakman custom finish products may damage the
finish and void the product warranty. Please be sure
to only use approved cleaners. Please contact
Speakman for any clarification of acceptable
cleaners.

WARRANTY

Warranty information can be found at:
www.speakman.com
1
Disassemble the Sink Strainer by removing the
Bottom Slip Joint Nut (1), Rubber Sealing Gasket
(2), and Lock Nut (3).
3
Remove the Basket (1) and set to the side.
2
Separate the Top Body (1) and Gasket (2) from
the Bottom Body (3).
4
Apply Plumber's Putty to the underside lip of the
Top Body. Insert Top Body into the sink from
above.