Cannon 10255G Instruction Book page 17

COOKER FINISH
Vitreous Enamel
Hotplate, burner caps,
fascia, roasting dish, grill
pan, oven base and rear,
inside of grill compartment,
inside of doors.
Paint
Side trims, plinth, fascia
bottom trim, side panels.
Lid & rear end caps (Oxford)
Aluminium
Hotplate burner bodies
Glass
Oven/grill door fronts
Lid (Oxford)
Chromium Plating
Oven shelves, grill pan grid, grill
pan handle support
Plastic
Grill pan handle, door
handles, control knobs
Note: To ensure rapid lighting of the hotplate burners every time they are used, the
ignitors must be kept clean and dry. Remove any food spillage or cleaning materials
from the electrode using a small nylon brush such as a toothbrush.
CARE AND CLEANING
Cloth wrung out in hot soapy water. Stubborn
stains can be removed with a cream paste,
liquid cleaner or by rubbing with fine steel wool
Check that the cleaning agent is approved by the
Vitreous Enamel Development Council.
Wash with a cloth wrung out in hot soapy water only.
Similar to paint cleaning above. Use a nylon brush to
remove any cleaning materials, water or dirt from the
As for enamel cleaning. Polish with a clean dry cloth or
Wipe with a cloth wrung out in hot soapy water.
A fine steel wool soap pad e.g. Brillo, Ajax, or a
chrome or stainless steel cleaner may be used.
Wipe with a cloth wrung out in hot soapy water.
Stubborn stains can be removed with a cream
CLEANING METHOD
soap pads.
DO NOT USE ABRASIVES.
hotplate burner rings.
kitchen roll.
cleaner.
17