Table of Contents
Advertisement
3. Connect your xDSL / cable modem to the WAN port of ZSR4134WE by Ethernet
cable.
4. Please check all LEDs on the top panel. POWER LED should be steadily on, WAN and
LAN LEDs should be on if the computer / network device connected to the
respective port of ZSR4134WE is powered on and correctly connected. If any LED
you expected is not on, please recheck the cabling, or jump to "Troubleshooting"
for possible reasons and solution.
All manuals and user guides at all-guides.com
5
Advertisement
Table of Contents
