Glensound GSGC5 Quick Start Manual

Audio broadcast

ACCREDITED SOLUTION

EXPLORER™ 700 – Glensound GSGC5 Audio Broadcast

Table of Contents

Need help?

Do you have a question about the Glensound GSGC5 and is the answer not in the manual?

Page 1 ACCREDITED SOLUTION EXPLORER™ 700 – Glensound GSGC5 Audio Broadcast...
Page 2 Fully self contained, the GSGC5 is compact, flexible and very easy to operate. Just plug one end of the ISDN cable in the Glensound and the other end into one of the ISDN ports on the EXPLORER™ 700 terminal, dial the studio and be ready to broadcast.
Page 3 If you make any changes remember to Apply the new setting. Connect the Glensound GSGC5 to the ISDN interface on the EXPLORER™ 700 using an ISDN cable or the standard Cat-5 LAN cable and dial-up using the dial pad on the Glensound.
Page 4 Information in this document is subject to change without notice and does not represent a commitment on the part of Thrane & Thrane A/S. © 2006 Thrane & Thrane A/S. All rights reserved. Printed in Denmark. Accredited Solution EXPLORER™ 700 – Glensound GSGC5 Audio Broadcast Page 4/4...