SpringWell CSF+ Setup And Installation Manual page 9

CSF+ Whole House Filter/Salt Free Softener
Prepping the Pre-Filter
33) Unscrew the lid from the
Pre-Filter Housing.
36) Squeeze the lubricant onto
the O-Ring then spread it using
your finger.
Pre-Filter Housing
34) Insert the Sediment Filter
into the Pre-Filter Housing.
Ensure it sits beneath the edges
of the housing.
37) Flip the O-Ring over and
lubricate the opposite side as
well.
Questions? Call (800)-589-5592
This step will require the materials listed below
Sediment Filter O-Ring w/Lube
35) The O-Ring will now be laid
into the groove around the top
of the Pre-Filter Housing tank.
38) Replace the lid and fully
tighten it
9