SpringWell CSF+ Setup And Installation Manual page 13

CSF+ Whole House Filter/Salt Free Softener
61) Connect the outlet of the CF+
tank to the inlet of the FS+ tank
with a length of PVC.
64) Add a length of PVC to align
with the elbow you just
installed.
62) Start to build the connection
to the FS+ tank from the other
side of the bypass. Insert a piece
of PVC into the shut off valve.
65) Add a length of PVC to the
elbow to align with the PVC
leading out from the FS+ tank.
67) The system connections
should look similar to this upon
completion.
Questions? Call (800)-589-5592
63) Add an elbow pointing
towards the outlet connection on
the FS+ tank.
66) Complete the connection by
adding an elbow to the PVC
lengths.
68) Prior to turning the water
back onto the system use the
spanner wrench to fully tighten
the pre-filter housing to avoid
any leaks.
13