SpringWell CSF+ Setup And Installation Manual page 7

CSF+ Whole House Filter/Salt Free Softener
Assembling a Bypass Valve
16) Cut two 3" pieces of PVC for the
next step.
19) Cut and attach a piece of
rd
PVC approx. 1/3 of the length
to the neighboring connector.
22) Connect one of the shut off
valves to the PVC leading
between the connections.
17) Insert one piece of the cut
PVC into each of the elbows
facing upward.
20) This is what your bypass
should look like after step 19.
23) Complete the connection by
cutting a piece of PVC to fit
between the connections.
Questions? Call (800)-589-5592
18) Attach one of the 3-way
splitters with the openings
facing up and towards the
other connector
21) Attach the other 3-way
splitter to the opposite
connector. Ensure the openings
are facing up and inward.
24) This is what the bypass will
look like after step 23.
7