Commax CDL-1AR User Manual page 11

06
Cause and solution
•If the product does not operate normally, check the following check point first.
If problem are still unsolved, please ask service center.
Problem
- Please check battery status bad or gone power
and check battery input direction.
No Power
- Please change new 4 alkaline Battery.
- Please input password short "Beep"sound
Cannot change
one by one.
Password
- Again password register / repeat input.
- Please check passwor input correctly
- When input password, keypad light off,
No open the door
it will be not change password , presss the
though push
[ ] button and check keypad light on,
[ ]button
input password again. (if didnot input password
within 7sec, it will be canceled.)
Password / Smart key
- Please try 9V emergency power(square type)
authentication success
- Lock can may broken. please contact service
but no open the door
center.
- Beep indicating the battery replaced.
keep going alarm
If you heard this alarm, please replace all new
"Beleek x3 "
4pcs battery.
warning sound
- Please reset auto mode.
No enter
- Sound occurs the batteries discharge and does
Auto Locking
not work. please change all new battery
20
Digital Door Lock COMMAX
Solution ref.
Page 19
Page 8
Page
8, 11
Page
18, 19
Page 19
Page
15, 19
MEMO
21