Basic Technical Checks; Recommended Quality Checks - Repose Healthcare+ User Manual

Basic Technical Checks

If the chair stops working and you have purchased an Accupak battery system, please refer to
pages 8 and 9.
If you haven't then some simple checks, you might carry out are as follows:
• CHECK the green light on the transformer is on when it is plugged into the mains. If it isn't
then the transformer is not working properly.
If it is on and the chair is not working, then:
• CHECK the handset is not damaged.
If both these are okay then check the following, but
chair from the power source when doing the following checks.
• CHECK the wall socket is in working order by trying another appliance.
• CHECK to see if any cable connections have become disconnected.
• CHECK to see if any of the cables are damaged or trapped. Damaged cables should be changed.
• DO NOT open or attempt to open any electrical components. To do so may invalidate your
warranty.
If the chair is still not working then contact an authorised chair engineer or your supplier and ask
them to check the chair thoroughly.

Recommended Quality Checks

The chair should always be checked regularly for signs of damage or excessive wear and tear to
ensure safe and reliable usage is maintained. The number of checks will be determined by your
internal risk assessment procedures.
Regular checks should include, but are not limited to:
• Damage to the cables.
• Any loose or detached parts.
• Damage to the handset.
• Damage to the transformer.
• Castors for damage or any build up of fluff, dirt or dust particles.
• Damage to the fabric of the chair.
ALWAYS DISCONNECT your
11