Basic Technical Checks; Recommended Quality Checks - Repose Haven User Manual

Basic Technical Checks

If the chair stops working and you have purchased either an Accupak or a 20 Cycle
battery system please refer to pages 8, 9 and 10. If you do not have either system
then some simple checks you might carry out are:
• CHECK the handset is not damaged.
If this is okay then check the following, but
the power source when doing the following checks.
• CHECK the wall socket is in working order by trying another appliance.
• CHECK to see if any cable connections have become disconnected.
• CHECK to see if any of the cables are damaged or trapped. Damaged cables should be changed.
• DO NOT open or attempt to open any electrical components. To do so may invalidate
your warranty.
If the chair is still not working then you should contact an authorised chair engineer or your
supplier and ask them to check the chair thoroughly.

Recommended Quality Checks

The chair should always be checked every time it is used for signs of damage or excessive wear
and tear to ensure safe and reliable usage is maintained. Regular checks should include, but are not
limited to:
• Damage to the cables.
• Any loose or detached parts.
• Damage to the handset.
• Damage to the fabric of the chair.
• Castors for damage or any build up of fluff, dirt or dust particles.
ALWAYS DISCONNECT your chair from
11