Repose Healthcare+ User Manual page 7

• When moving the Oregon chair ALWAYS ENSURE the user is secure and in no danger of
falling out of the chair.
• YOU ALWAYS take the necessary precautions and advice when carrying out any movement or
handling operation. Important Note – Due to the weight of Montana Bariatric two people may
be required to carry out any chair locational movement / set up.
• NEVER push a chair up or down steps or stairs.
• When using the functionality of the chair whilst someone is seated ALWAYS ensure that any
movements are smooth and comfortable for the user to avoid any distress.
• YOU ALWAYS lock the castors when the chair is stationary, for making transfers
or when altering the chair set up. THIS WILL AVOID any movements that could cause
personal injury.
• ALWAYS ENSURE that the swing arms on the Oregon are locked into place after use.
• Children DO NOT play with the handset, or on, the chair as this may cause damage and could
result in personal injury.
• NO ONE stands or sits on the arms or the leg rest as this may damage the chair and/or cause it
to tip. To do so may cause personal injury.
• You are ALWAYS careful to keep hands, other body parts and clothes away from the moving
parts of the mechanism when checking or during usage to avoid them being trapped.
• YOU NEVER exit the chair whilst the leg rest is elevated.
• The chair is ONLY OPERATED at normal room temperatures AND IS NEVER used or
stored in a damp or wet area.
• YOU ALWAYS store your handset on the chair seat or on the magnetic connection if you have
chosen this optional extra and ensure that it is safe from damage.
• YOU ALWAYS disconnect the power supply before checking any part of the chair.
• NO cables are trapped under the chair and that YOU DO NOT run over the cables with any
equipment e.g. vacuum cleaner.
• If there is a spillage on the chair IMMEDIATELY DISCONNECT THE ELECTRICITY
FROM THE MAINS and check that no electrical components are wet. If in any doubt, please
consult with your supplier or an authorised chair engineer.
Maintenance and repairs
• YOU ONLY USE approved parts on your chair. These can be obtained through your supplier.
Failure to use approved parts will invalidate your warranty.
• YOU ALWAYS get your supplier or an authorised chair engineer to carry out any repairs or
fit new parts to the chair. DO NOT attempt to carry out your own repairs to the chair as this
may invalidate your warranty.
• YOU NEVER MAKE any material design, mechanical or other modifications to the chair as this
may affect the way in which the chair operates and the inherent safety features. It will also
invalidate your warranty.
• YOU PROVIDE your original purchase invoice and unique chair batch number when ordering
parts or when making a claim under your warranty.
7