Advertisement
Step 18
Place the top edge of the roll top door (18) into the notches of the sidewalls. (The
door may need to be bowed slightly to place the edges into the notches.) Then
push the door up into the track, until the entire door is in the track. Once the roll
door (18) is in the track slide it down to its closed position. Repeat this step for
the opposite side.
Step 19
Align the right door (15) hinge with the mating hinge on the sidewall. Align the
door hinge pin holes with the hinge pin holes in the sidewall. Slide the hinge pin
tube (17) into the aligned holes (Note: It may be necessary to move the door and
tap the hinge pin tube with a hammer until the hinge pin tube is fully seated all the
way through the hinge holes.) Repeat this step for the remaining right door (15)
and to the remaining left doors (16).
24
Advertisement
