Okina USA SVD-248AI Operational Manual

Operational Manual
Vandal Proof 3-AXIS Vari-Focal D&N Dome
Please read the Operational Manual
before attempting to use this product.
FEATURES
1/3" Hi-Res. CCD
480 TV Lines
3.8mm~9.5mm Aspherical Vari-Focal Lens
0.5 Lux @ F2.0
3-AXIS design for any angle
Multi Color Temperature for AWB
Dual Power 12V DC / 24V AC
CAUTION
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may
damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could
damage the camera.
3. Requires a proper operating environment
This camera is designed for outdoor or indoor use. The allowable
temperature range for operation of this camera is between -10°C ~ 50°C
and the allowable humidity is 85%RH maximum.
4. Clean the front face to the pick-up device
It is recommended that the pick-up device surface be cleaned before lens
installation or whenever the lens is changed. Cleaning should be done by
using a chamois, a very fine soft cloth, lens tissue, or cotton tipped
applicator and ethanol to carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera
must meet the specifications). Camera must be connected to a surge
protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch
dangerous voltage points of short out parts that could result in a fire or
electric shock. Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to
qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video
product.
c. If the video product has been dropped or the cabinet has been
damaged.
d. When the video product exhibits a distinct change in performance.
SVD-248AI
WARRANTY
OKIUSA Products are covered under warranty for one year from the date
of purchase. The warranty will automatically be voided if any of the
following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any
information regarding when and where the product was purchased.
We have no other way to verify the purchase record without the serial
number on the camera sticker; therefore, it should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not
described in this manual, the warranty will be voided immediately. It is
the customer's responsibility to keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with.
Cutting or modifying of the cables will result in termination of the
warranty.
SPECIFICATIONS
Model
Image Sensor
Total Pixels
Video Output
Resolution
Minimum
Illumination
Scan System
S/N Ratio
Electronic
Shutter
Synchronization
Gamma
Correction
Auto Gain Control
Back Light
Compensation
Auto White
Balance
Aperture
2H Mode of H.V aperture correction
Correction
3.8mm~9.5mm Aspherical Vari-Focal Lens
Lens
Power Supply
Power
Consumption
Operation
Temperature
Storage
Temperature
Dimension
Weight
SVD-248AI
1/3" Hi-Res. CCD
NTSC: 771(H) x 492(V)
PAL: 753(H) x 582(V)
1.0Vp-p / 75 ohms
480 TV Lines
0.5 Lux @ F2.0
2:1 Interlace
More than 48dB
Auto and up to 1/100,000
Internal
0.45
Full Auto
Full Auto
ATW with MCT Technology
(Multi Color Temperature AWB)
(IR Cut)
12V DC / 24V AC
180mA +10% under 12V DC
o o
-10 C ~ +45 C
o o
-30 C ~ +60 C
68.3mm(H) x 138mm(D)
492.4g
SVD-248AI-Rev09/2007