Related Manuals for Kenwood KPG-22U
Summary of Contents for Kenwood KPG-22U
- Page 1 KPG-22U/ KPG-36U/ KPG-43U/ KPG-46U Troubleshooting Document No.: Version: 1.00 Last Updated: February, 2011...
- Page 2 This troubleshooting document is supplied on an “as-is” basis and no warranty is made, either express or implied, as to its suitability for any particular purpose. Kenwood Corporation will not accept any claim for damages whatsoever arising as a result of use or failure of this driver. The information in this troubleshooting document is subject to change without notice.
- Page 3 If there are multiple USB ports on the PC, connect KPG-22U, KPG-36U, KPG-43U or KPG-46U to a different USB port. If a USB port on the front panel is used, connect KPG-22U, KPG-36U, KPG-43U or KPG-46U to a USB port on the back panel.
- Page 4 How do I uninstall the KPG-22U, KPG-36U, KPG-43U or KPG-46U driver? Question Answer Follow the procedure below to delete KPG-22U, KPG-36U, KPG-43U or KPG-46U setup file and drivers. 1. Start up the PC, and then make sure that Windows XP, Windows Vista or Windows 7 is properly running.
- Page 5 Answer The communication time significantly varies depending on the PC and the configured baud rate. Also, it may take longer if the firmware is written by using KPG-22U, KPG-36U, KPG-43U or KPG-46U and the corresponding FPRO (Version 6.00 or later).