Download Print this page

Cytech KP04AE Instructions

Hide thumbs Also See for KP04AE:

The vertical row of button on the right control the display of the sensor values on the LCD.

Button

Function

Press to Increase the Setpoint of the sensor

Press to Decrease the Setpoin of the sensort

Press to Toggle the Setpoint Enable/Disable. If Disabled, the setpoint will not be

displayed and will not cause alarm.

Default

KP04AE Instructions

Table of Contents

Need help?

Do you have a question about the KP04AE and is the answer not in the manual?

Page 1 KP04AE Instructions The vertical row of button on the right control the display of the sensor values on the LCD. Button Function Press to Increase the Setpoint of the sensor Press to Decrease the Setpoin of the sensort Press to Toggle the Setpoint Enable/Disable. If Disabled, the setpoint will not be displayed and will not cause alarm.
Page 2 Button Function Press to selecty the next Sensor to be displayed. Up to 8 sensors can be didplayed LED Indications Off (Green) Steady Security Off, all conditions Normal (no trouble) Blinking Trouble e.g. Phone line cut, RS485 comms failure. Trouble Condition is displayed Arm (Red) Steady System armed,...
Page 3 Name of Sensor: Room 1 Humidity Humidity 56% Setpoint has been disabled and is not shown. Pressing the On/Off key will enable the setpoint If a sensor value eg Temperature exceeds the setpoint, an alarm is triggered. The alarm is displayed on the LCD eg Main Temperature Alarm, and a siren sound id heard on the keypad.