Subscribe to Our Youtube Channel
Related Manuals for iStartek VT900-L
Summary of Contents for iStartek VT900-L
- Page 1 File Name VT900-L User Manual Ver. Update 2018-09-10 Page 1 of 13 iStartek Vehicle GPS Tracker VT900-L 4G Tracker User Manual V1.0 Copyright Statement © 2019 Shenzhen iStartek Technology Co., Ltd. All rights reserved.
- Page 2 8.4、数字输入线安装 ........................ 11 8.5、模拟量输入安装 ........................ 11 8.6、输出控制线安装 ........................ 12 8.7、温度传感器安装（定制） ....................12 8.8、RFID读卡器安装 ....................... 12 8.9、iButton安装（定制） ......................13 8.10、磁读卡器安装（定制）...................... 13 8.11、超声波油量传感器安装...................... 14 8.12、酒精传感器安装（定制） ....................14 8.13、OBD盒子安装（定制） ..................... 14 Copyright Statement © 2019 Shenzhen iStartek Technology Co., Ltd. All rights reserved.
-
Page 3: Copyright And Disclaimer
Shenzhen iStartek Technology Co., Ltd. This user manual shall not be reproduced for any purpose or transmitted in any way without written authorization of iStartek company. iStartek shall not be liable for any direct or indirect damages (included but not limited to economic losses, personal damage, loss of property and assets) caused by the use, non-use or improper use of this product or documentation. -
Page 4: Product Specification
Working humidity 5% to 95% LMN：Cat-M/NB/GSM LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25*/B26*/B28 LTE-TDD: B39 (for Cat M only) EGPRS: 850/900/1800/1900MHz LEC(EU)：Cat-1 LTE/WCDMA/GSM Band LTE-FDD: B1/B3/B7/B8/B20/B28 WCDMA: B1/B8 GSM: B3/B8 LNS(US)：Cat-1 LTE-FDD: B2/B4/B5/B12/B13/B25/B26 Copyright Statement © 2019 Shenzhen iStartek Technology Co., Ltd. All rights reserved. - Page 5 GSM Antenna 5.2、Optional Accessories RFID Reader RFID Tag iButton Reader iButton Tag Ultrasonic Fuel Sensor Capacitive Fuel Sensor Temperature Sensor Relay Magnetic Card Reader USB Cable Buzzer Alcohol Sensor Copyright Statement © 2019 Shenzhen iStartek Technology Co., Ltd. All rights reserved.
-
Page 6: Product Appearance
7.1、Charging For the first time using the VT900-L, please connect the DC (positive) and GND (ground) to the 12V or 24V power supply for at least 2 hours to ensure sufficient power. After configuration and testing, install it on the vehicle. -
Page 7: Gps Indicator（Blue
GPS antenna is used to receive satellite signal in the sky and should be fixed to face the sky and can not be installed in a place with metal shielding. 7.4、Turn on VT900-L Long press the ON/OFF button for 3-5 sec, or connect to the external power supply, VT900-L will start up. LED operation status: GPS Indicator（blue）... - Page 8 7.7、Parameter Configuration Download and install USB cable driver《PL2303_Prolific_Driver》。 Connect VT900-L to the computer via USB cable. Operating Parameter Editor configuration software and open the port. Press the on/ off button for 1sec to make device enter Parameter Editor configuration state.
-
Page 9: Product Installation
You can set server IP, Port and APN, GPRS interval by SMS commands 011, 012, 013, 014, or you can use Parameter Editor software to configure related parameters. For more SMS command functions and parameter configuration, please refer to 《iStartek SMS Protocol》 and 《Parameter Editor User Guide》。... - Page 10 VT900 RX output VT900 TX 8.3、GND installation Connect respectively the power cable and GND to the positive pole and negative pole of the car battery to give Power supply： Copyright Statement © 2019 Shenzhen iStartek Technology Co., Ltd. All rights reserved.
-
Page 11: Analog Input (Ad1) Installation
Output voltage of the sensor is 0V when the fuel tank is empty, Output voltage of the sensor is 5V when the fuel Tank is full. Calculate the percentage of Remaining oil： Oil percentage = (((AD*24)/1024)/5)*100% Copyright Statement © 2019 Shenzhen iStartek Technology Co., Ltd. All rights reserved. -
Page 12: Output Control Wire Installation
Device connect with RFID Reader can prevent driver start vehicle illegally，the wiring diagram as follows： When the driver starts the vehicle without swiping the authorized card, it is considered to start illegally, and the device will Copyright Statement © 2019 Shenzhen iStartek Technology Co., Ltd. All rights reserved. -
Page 13: Magnetic Card Reader Installation (Customized)
When the driver starts the vehicle without swiping the authorized card, it is considered to start illegally, and the device will automatically disconnect the oil and electricity and fail to start the vehicle. For related parameter setting instructions, please refer to iStartek SMS protocol and iStartek GPRS Protocol. 8.10、Magnetic Card Reader installation (customized) Customize the software version for DLT. -
Page 14: Ultrasonic Fuel Sensor Installation
For related parameter setting instructions, please refer to iStartek SMS Protocol and iStartek GPRS Protocol. The wiring diagram is as follows: If you have any other questions, please send an email to info@istartek.com, we are happy to serve you. Copyright Statement © 2019 Shenzhen iStartek Technology Co., Ltd. All rights reserved.
Need help?
Do you have a question about the VT900-L and is the answer not in the manual?
Questions and answers