Cable Cover-Optional; Removing The Cable Cover - Dell OptiPlex 7490 All-In-One Service Manual

Steps
1. Align the tabs on the stand with the slots on the back cover.
2. Slide the stand upward until it clicks into place.
Next steps
1. Follow the procedure in
Cable cover—optional

Removing the cable cover

Prerequisites
1. Follow the procedure in
CAUTION: When servicing the system, place it on an elevated, clean, and flat surface. It is recommended to
remove the stand to avoid accidental damage to the system display during servicing.
2. Remove the stand.
About this task
The following image provides a visual representation of the cable cover removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 19