Dell OptiPlex 7490 All-In-One Service Manual page 91

Table 4. System setup options—System information menu (continued)
Overview
DIMM_SLOT 2
Devices Information
Panel Type
Video Controller
Video Memory
Wi-Fi Device
Native Resolution
Video BIOS Version
Audio Controller
Bluetooth Device
LOM MAC Address
Slot 1
SATA 0
Slot 2_M.2
Slot 3_M.2
Table 5. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot mode
Boot Sequence
Secure Digital (SD) Card Boot
Secure Boot
Enable Secure Boot
Secure Boot Mode
Expert Key Management
Enable Custom Mode
Custom Mode Key Management
Table 6. System setup options—Integrated Devices menu
Integrated Devices
Date/Time
Camera
Audio
Displays the DIMM 2 memory size.
Displays the Panel Type of the computer.
Displays the video controller type of the computer.
Displays the video memory information of the computer.
Displays the wireless device information of the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays the Bluetooth device information of the computer.
Displays the LAN On Motherboard (LOM) MAC address of the computer.
Displays the M.2 network information of the computer
Displays the SATA hard drive information of the computer.
Displays the M.2 PCIe SSD information of the computer.
Displays the M.2 PCIe SSD information of the computer.
Displays the boot mode.
Displays the boot sequence.
Enable or disable the SD card read-only boot.
By default, the Secure Digital (SD) Card Boot option is not enabled.
Enable or disable the secure boot feature.
By default, the option is not enabled.
Enable or disable to change the secure boot mode options.
By default, the Deployed Mode is enabled.
Enable or disable custom mode.
By default, the custom mode option is not enabled.
Select the custom values for expert key management.
Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Enables or disable the camera.
By default, the Enable Camera option is selected
System setup 91