Dell OptiPlex 7490 All-In-One Service Manual page 93

Table 8. System setup options—Display menu
Display
OSD Button Management
Disable OSD Buttons
Full Screen Logo
Table 9. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
HTTPs Boot Feature
HTTPs Boot
HTTPs Boot Mode
Table 10. System setup options—Power menu
Power
USB PowerShare
Enable USB PowerShare
USB Wake Support
Enable USB Wake Support
AC Behavior
AC Recovery
Block Sleep
Deep Sleep Control
Enable or disable the OSD (On-Screen Display) buttons on the computer.
Enable or disable full screen logo.
By default, the option is not enabled.
Controls the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
Enable or disable the internal WLAN device
By default, the option enabled.
Enable or disable the internal Bluetooth device
By default, the option enabled.
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the option is enabled.
Enable or disable the HTTPs Boot feature.
By default, the HTTPs Boot option is enabled.
With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.
By default, the Auto Mode option is enabled.
Enable or disable the USB PowerShare.
By default, the Enable USB PowerShare option is disabled
When enabled, you can use the USB devices like a mouse or keyboard to wake
your computer from standby.
By default, the option is enabled.
Enables the system to turn on automatically, when AC is inserted.
By default, the Power Off option is enabled.
Enables to block entering sleep (S3) mode in the operating system.
By default, the Block Sleep option is disabled.
Enable or disable the Deep Sleep mode support.
System setup 93