Ironing Chart; Tips And Tricks - Electrolux EasyLine ESI4007 Instruction Book

IRONING CHART

EN
FABRIC
CNS
Acrylic
CNT
Acetate
KR
Nylon & Polyester
ID
Rayon
Viscose
TH
Silk
VN
Cotton blends
Wool & Wool blends
Cotton
Corduroy
Linen
Denim
Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in
the table!

TIPS ANd TrICkS

Temperature settings
The iron heats up faster than it cools down, so we recommend that you start ironing the fabrics requiring the
lowest temperature. Use the lowest temperature with fabrics that have unusual finishes, such as sequins or
embroidery. If you are unsure about the fabric, start with a low temperature and iron on a hidden corner. Then
increase the temperature gradually if needed.
Avoiding marks on the fabric
Never iron areas with traces of perspiration or other marks, the heat fixes the stains on the fabric.
Washing fabrics before ironing
If the washing machine is heavily loaded or the spin drying revolutions are very high, the fabrics may come out
more creased. However, many fabrics are easier to iron if they are damp.
6
TEMPERATURE SETTING
to "max"
to "max"
IRONING RECOMMENDATION
Dry iron on the inner facing side.
Dry iron on the inner facing side while the fabric is still
damp or use spray to dampen.
Iron on the inner facing side while the fabric is still
damp or use spray to dampen.
Iron on the inner facing side of fabric.
Mainly dry iron. Steam can be used under
manufacturer's instructions.
Iron on the inner facing side. Use an ironing cloth to
prevent shine marks.
Check the label and follow the manufacturer's
instructions. Use setting for the fibre requiring the
lowest setting.
Steam iron on the inner facing side or use ironing
cloth.
Dry iron while the fabric is still damp or use spray to
dampen. Use steam medium to high.
Steam iron on the inner facing side or use ironing
cloth.
Iron on the inner facing side or use ironing cloth to
prevent shine marks, especially with dark colours.
Dry iron while the fabric is still damp or use spray to
dampen. Use steam medium to high.
Use maximum steam.
www.electrolux.com