Timer; Sleep Timer - Philips FW-C35 Manual

All manuals and user guides at all-guides.com

TIMER

22
5 Press CLOCK•TIMER again to
store the setting.
™ The clock starts.
• To exit without storing the setting,
press Çon the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD or
TUNER mode automatically at a
preset time. It can serve as an alarm
to wake you up.
• Before setting the timer, make sure
the clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum
level until the volume level
before the set is switched to
standby mode.
1 Press and hold CLOCK•TIMER
for more than two seconds to
select timer mode.
pg 01-28/C3-35-30/37-Eng 1 22
™ "12:00 " or "00:00" or the – If the source selected is CD, playback
AM
last timer setting starts flashing will begin with the first track of the
depending on whether you have selected disc or program. If the CD
selected 12- or 24-hour mode. trays are empty, the TUNER will be
™ The
starts flashing. selected instead.
TIMER
™ The selected source is lit while – The timer will not activate if a recording
other available sources are is in progress.
flashing.
2 Press CD or TUNER to select the To switch off the TIMER
desired source. 1 Press and hold CLOCK•TIMER
• Before selecting CD, make sure a CD for more than two seconds.
2 Press Ç on the system to cancel the
is loaded in the CD carousel tray.
3 Press à or á on the system to set
timer.
™ The timer is now switched off.
the hour for the timer to start on
the system. ™ The display will show "CANCEL"
4 Press í or ë on the system to set
the minute for the timer to start.
5 Press CLOCK•TIMER to store To start the TIMER again (for the
the start time. same preset time and source)
™ The timer is now set. 1 Press and hold CLOCK•TIMER
™ The
remains on the display. for more than two seconds.
TIMER
2 Press CLOCK•TIMER again to
• At the preset time, the timer will be
activated. store the start time.
™ The selected source will be ™ The timer is now on.
played. ™ The
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the
last tuned frequency will be switched
on.

SLEEP TIMER

Sleep Timer
control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
™ The selections are as follows (time
in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 ...
™ "SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
and the disappears. minutes.
TIMER
2 When you reach the desired length
of time, stop pressing the SLEEP
button.
™ After this amount of time passes,
the system will switch to the
standby mode.
To switch off the Sleep Timer
appears on the display. • Press SLEEP repeatedly until "OFF"
TIMER
is displayed, or press the
STANDBY ON button.
12/14/99, 9:48 AM
(only on remote
3139 116 19372 (ENG)