Philips FW-C35 Manual page 17

All manuals and user guides at all-guides.com
17
Storing Preset Stations
You can store up to 40 radio stations in
the memory. When a preset radio
station is selected, the preset number
appears next to the frequency on the
display.
Automatic programming
1 Press TUNER (FM•AM).
2 Press PROGRAM for more than
one second.
™ The PROG flag starts flashing and
"AUTO" will be displayed.
™ The system will search for every
available station in the FM
waveband first, then search the
AM waveband.
™ All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.
™ The system will stop searching
when all the available radio
stations are stored or when the
memory for 40 preset radio
stations is used.
™ The system will remain tuned to
the last stored preset radio
station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
Ç (on the system only).
pg 01-28/C3-35-30/37-Eng 1 17
TUNER
– If you want to reserve a section of Notes:
preset numbers, for example preset – When 40 radio stations are stored and
numbers 1 to 9, select preset 10 you attempt to store another radio
before starting automatic programming, station, the display will show
"PROGRAM FULL". If you want to
only the preset numbers 10 to 40 will
be programmed. change an existing preset number,
repeat steps 3 – 5.
Manual programming – You can cancel manual programming
by pressing Ç (on the system only).
1 Press TUNER (FM•AM).
2 Press TUNER (FM•AM) again to – During programming, if no button is
select the desired waveband : FM or pressed within 20 seconds, the system
AM. will exit program mode automatically.
3 Press PROGRAM for less than one
second.
Tuning to Preset Radio
™ The PROG flag starts flashing.
Stations
™ The next available preset number
• Press 4 or 3 to select the desired
will be displayed for selection.
preset number.
4 Press à or á to tune to the
™ The preset number, radio
desired frequency.
• If you wish to store the radio station
to another preset number, press 4
or 3 to select the desired preset
number.
5 Press PROGRAM again.
™ The PROG flag disappears and
the radio station will be stored.
• Repeat steps 3 – 5 to store other
preset radio stations.
frequency, and waveband appear
on the display.
12/14/99, 9:48 AM
3139 116 19372 (ENG)