Table of Contents
Advertisement
3.3 Twisted Pair Segment
Connections
Follow these steps:
1. Using standard 10BASE-T media,
insert the plug on one end of the
network cable into one of the RJ-
45 female ports on the 10BASE-T
MiniHub. Even though the Hub's
ports are of the shielded type,
they will accept and operate
properly
with either unshielded or
shielded RJ-45 twisted-pair wiring
plugs.
Fig. 3-3. Twisted-Pair Segment Connections.
CHAPTER 3: Installation
2. Connect the other end of each
network segment to the
applicable workstation or user
device. The "Link" LED will be lit
for each port where the
connection is made on both ends
of the segment, and where the
AC power is on at each end as
well, iin other words, when the
segment circuit is established and
is ready to use.
3. For the port #8 up-link options,
see Section 3.4.
15
Advertisement
Table of Contents
