HID Signo 25B Installation Manual page 2

Specifications
Current
Input
Voltage
Standby
AVG
1
12 VDC 800 mA
Standby AVG - Root Mean Square current draw without a card in the RF field.
1
2 Maximum AVG - Root Mean Square current draw during continuous card reads. Not evaluated by
UL.
3 Peak - highest instantaneous current draw during RF communication.
Regulatory
UL
Connect only to a Listed Access Control / Burglary LPS power supply. These
readers are intended to be used with listed (UL294) control equipment. Suitable for
outdoor use.
Only Wiegand and Bluetooth communications have been evaluated by UL.
The Open Collector Output has not been evaluated by UL.
RS485 communications has not been evaluated by UL.
Inputs (reserved for future use) have not been evaluated by UL.
The Ethernet connection is for supplemental use; the unit is connected to an Access
Control Panel.
The Signo 25B Biometric Reader is compatible with HID Mobile Access® version
3.3.1 and later using mobile devices with BLE version 4.2 and later listed at:
https://www.hidglobal.com/mobile-access-compatible-devices
Install in accordance with NFPA70 (NEC) Local Codes, Canadian Electrical Code
CSA 22.1, and authorities having jurisdiction. Follow all National and Local Codes.
UL 294 Performance Levels
Access
Destructive
Control Line
Model # Attack
Security
Level
Level
25B Level I Level I
CE Marking
HID Global hereby declares that these proximity readers are in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
Por el presente, HID Global declara que estos lectores de proximidad cumplen con
los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/
EU.
HID Global déclare par la présente que ces lecteurs à proximité sont conformes
aux exigences essentielles et aux autres stipulations pertinentes de la Directive
2014/53/EU.
A HID Global, por meio deste, declara que estes leitores de proximidade estão em
conformidade com as exigências essenciais e outras condições da diretiva 2014/53/
EU.
HID Global bestätigt hiermit, dass die Leser die wesentlichen Anforderungen und
anderen relevanten Bestimmungen der Richtlinie 2014/53/EU erfüllen.
HID Global dichiara che i lettori di prossimità sono conformi ai requisiti essenziali e
ad altre misure rilevanti come previsto dalla Direttiva europea 2014/53/EU.
Download copies of the Radio Equipment Directive (RED) Declaration of
Conformity (DoC) at: http://www.hidglobal.com/certifications.
To ensure that RF exposure levels remain at or below the tested levels, a minimum
safe separation distance of 10 mm between the user and the reader is required for
RF exposure compliance.
Canada Radio Certification
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
Powering
Trusted Identities
Americas & Corporate
611 Center Ridge Drive
Austin, TX 78758
USA
Support: 866-607-7339
Fax: 949-732-2120
hi dg l ob a l .com
Operating Temperature
Max
Peak
3
AVG
2
-4° F to 150° F
1.5 A 2 A
(-20° C to 66° C)
Stand-by
Endurance
Power
Level
Level
Level IV Level I
Asia Pacific
19/F 625 King's Road
North Point, Island East
Hong Kong
Support: 852-3160-9833
Fax: 852-3160-4809
E4662
FCC
This device complies with part 15, subpart C, of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. These limits are designed to provide
reasonable protection against harmful interference. This equipment generate,
uses and can radiate RF energy and if not installed and used in accordance with
instruction, may cause harmful interference. Possible solution include: relocate
the device, increase separation between equipment, power equipment separately,
consult with your dealer.
CAUTION: Any changes or modifications to this device not explicitly approved by
HID Global could void your authority to operate this equipment.
Taiwan
根據NCC低功率電波輻射性電機管理辦法 規定:
第十二條 經型式認證合格之低功率射頻電機， 非經許可， 公司、 商號或使用者均不得擅自變
更頻率、 加
大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信； 經發現有干擾現象
時， 應立即停
用， 並改善至無干擾時方得繼續使用。
前項合法通信， 指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、 科學及醫療用電波輻射性電機設備之
干擾。
South Africa
TA-2019/920
APPROVED
UAE
TRA
REGISTERED NO:
ER72356/19
DEALER NO:
DA37204/14
Conditions
Singapore
Complies with
IMDA Standards
DA103548
Brazil
Este equipamento não tem direito à proteção contra interferência prejudicial e não
pode causar interferência em sistemas devidamente autorizados.
Europe, Middle East & Africa
3 Cae Gwrydd
Green Meadow Springs
Cardiff
CF15 7AB
United Kingdom
Phone: +44(0) 2920 528 500
15
Equipment
8T2 9
ACC Control READER
An ASSA ABLOY Group brand
Australia and New Zealand
E4662
Brazil
Condomínio Business Center
Av. Ermano Marchetti, 1435
Galpão A2 - CEP 05038-001
Lapa - São Paulo / SP
Brazil
Phone: +55 11 5514-7100
General Signaling
Equipment
ABCD12345678
PLT-04026 Rev. B.1